FT-505F Light-sensitive ion wind nozzle

The photoelectric induction ion wind nozzle can eliminate static electricity or dust that is difficult to approach or touch objects. The air nozzle points to the target direction, and the ion airflow can be directly blown to the target surface without manual operation. The gas is controlled by a photoelectric switch, which is flexible and convenient to place. The ion needle is easy to replace. Need to be used with high voltage power supply

Section 1: Principle of Action

FT-505F photoelectric induction ion wind nozzle can generate a large amount of airflow with positive and negative charges, which is blown out by the compressed air at high speed, which can neutralize the charge on the object. When the charge on the surface of the object is negative, it will attract the positive charge in the airflow. When the charge on the surface of the object is positive, it will attract the negative charge in the airflow, so that the static electricity on the surface of the object is neutralized. , To achieve the purpose of eliminating static electricity, high-speed compressed air can also blow away the stubborn dust on the object.

Ionization device: The ionization device forms a stable high-strength electric field under the action of the low current and high voltage generated by the high-voltage generator. The ionized air forms ionic bodies, which are carried out by the high-pressure airflow to the surface of the object to achieve the purpose of neutralizing static electricity and removing dust.

Section 2: Product Features

• Neutralize static electricity quickly.

• Wide adjustment range of wind power.

• The air nozzle has good grounding protection.

Section 3: Technical Parameters

Operating voltage: 220VAV/50Hz or 110VAC/60Hz

Current consumption: ≤350μA

Operating temperature: 32℉(0℃)~122℉(50℃)

External high voltage generator voltage: 4.6kV

Weight: 2.6kg/set

Compressed air pressure: 5-70/psi

Air velocity: 10m/sec

In addition to static test results:

*Static elimination time complies with ESD standards.

Section 4: Safety

4.1 Read the operation manual before installation and operation.

4.2 The ground must be reliably grounded before operation.

4.3 Do not operate the air nozzle in a flammable and explosive environment.

4.4 Do not repair without authorization.

Section 5: Installation and operation:

FT-505F photoelectric induction ion wind nozzle needs to be used with FT-006 high voltage generator. Plug the power cord of the high-voltage generator into the 220VAC power socket, connect the compressed air duct to the air connector of the air nozzle seat, connect the ground, turn on the power, and turn on the high-voltage generator power switch to work.

Note; if necessary, you can choose to install an air filter.