FT-010A Long Type Horizontal Desktop Ionizer Fan

FT-010A large type horizontal ionizer air fan

Brief introduction:
The principle and use of FT-010A large bedroom ion fan are the same as those of ordinary-size horizontal ion fans (such as LX-828, SL-028). It is changed according to the customer's air volume for removing static electricity and the size of the product. A high-efficiency anti-static equipment with large air volume and wide range, which can be directly installed on the desktop or suspended for use. It is characterized by easy installation, stable work and fast electrostatic elimination.

The working principle:
FT-010A static elimination horizontal ionizer air fan has a built-in high-voltage generator to generate a large amount of airflow with positive and negative charges, and then blow it to the surface of the object by the ion fan, which can neutralize the charge on the object. When the surface of the object is negatively charged, it will attract the positive charge in the airflow. When the surface of the object is positively charged, it will attract the negative charge in the airflow, so that the static electricity on the surface of the object is neutralized to achieve The purpose of eliminating static electricity

Technical parameters of FT-010A large horizontal ion fan:

Product advantages:
1. Neutralize static electricity quickly
2. Large area covered by ion air flow
3. Wide range of wind adjustment
4. There are special examples for transmitter cleaning
5. There is a special cold air heating device
6. The fan has good grounding protection

Large horizontal ion fan FT-010A size structure diagram:

How to use:

1. The "U"-shaped frame is fixed on the side of the fuselage with screws, and it can be aligned with M8 diameter Torx screws.

2. It is required that 230V～, 50Hz or 115V～, 60Hz is the working voltage, and the fan ground socket should be a single-phase standard.

3. Turn the governor switch clockwise until the indicator light is on to turn on the fan, generate ion air flow, increase the wind speed of the fan, turn the governor switch clockwise, turn it to the "off" position, the indicator light is off, indicating that the fan is off .

4. If you need to adjust the airflow direction, you need to loosen the bracket Torx screws, tilt the body to adjust the up and down position, and then tighten the bracket screws.

5. When the ion wind needs to be heated, turn on the heating switch to heat the ion wind blown by the fan.

Anti-static time test results

*Ion balance voltage and static elimination time comply with ESD standards, and static elimination time is measured from a test voltage of 1000v to 100v.

*The test instrument uses ME268A electrostatic comprehensive tester.

*Test data will vary due to changes in ambient air temperature and humidity