DC-001A Single-head DC Type Ionizer Fan

FT-001C high frequency DC ionizer Fan

1. Brief introduction:
The FT-001C static removal ion fan is a high-frequency AC ion fan. It has a unique high-frequency discharge form. It is composed of positive and negative discharge needles. The ion balance voltage is equipped with an automatic balance system and a feedback control circuit. The balance voltage can be stabilized at a very low position, and the static electricity in the concentrated target or uneven area can be eliminated. The small size is suitable for eliminating static electricity in a small area.

2. Working principle:
The FT-001C high-frequency AC ion fan can generate a large amount of airflow with positive and negative charges, which can neutralize the charge on the object. When the surface of the object is negatively charged, it will attract the positive charge in the airflow. When the surface of the object is positively charged, it will attract the negative charge in the airflow, so that the static electricity on the surface of the object is neutralized to achieve The purpose of eliminating static electricity
   The ion circuit of the FC-001 ion fan adopts the most advanced international technology and has an automatic ion balance system. The circuit can automatically control the amount of positive and negative ions according to the voltage on the sensor (iron mesh cover) installed at the air outlet of the fan. Automatically control the ion fan to maintain a good ion balance and a wide temperature and temperature range.

3. Technical parameters:

4. Application:
The super anti-static performance of FC-001 high frequency AC ion fan can solve the production problems caused by static electricity, such as solving the dust collection problem caused by static electricity, the adhesion problem during the processing of plastic products, and the jumping problem of small parts caused by electrostatic repulsion. At present, it has been widely used in: hard disk manufacturing, pharmaceutical manufacturing assembly line, electronic production and packaging, LED assembly line, semiconductor assembly production line, microprocessor, etc.

5. Installation method:
The "U"-shaped frame of the ion fan is fixed on the side of the fuselage with screws. It can be fixed with M6 torx screws when in use. Desktop installation or hanging installation can be selected.

6. DC-001A high-frequency AC ion fan static elimination time test results:

7. Precautions:
DC-001A ionizer air blower releases a large amount of positive and negative charges through the discharge needle to cover the target area. The time and speed of removing static electricity are affected by many factors including the temperature and humidity of the operation site. The most important influencing factor is the distance between the ion blower and the target object or area and the ion The wind speed generated by the fan, the air ions constantly neutralize each other, and the positive and negative charges are attracted to each other through static electricity to form the transfer and recombination of these charges. High wind speed can make them neutralize more quickly. The higher the wind speed, the longer the time to remove static electricity. fast. When installing the ion fan, you should also consider making the ionized air flow generated by the fan cover the working area as much as possible, so as to completely eliminate the static electricity on the surface of the object.